colloidal sol

英 [kəˈlɔɪdəl sɒl] 美 [kəˈlɔɪdəl soʊl]

溶胶

化学



双语例句

  1. Ni colloidal sol catalyst for slurry phase hydrocracking of residue
    渣油悬浮床加氢工艺Ni液溶胶催化剂
  2. The silica sol shell was obtained by using colloidal processing technique at room temperature. The initial used to prepare silica sol shell were the FS-ⅱ quick-dry silica sol, JN-30 silica sol and silica powder.
    采用室温胶态成型技术制备硅溶胶型壳,所用原料有FS-Ⅱ快干硅溶胶、JN-30硅溶胶和石英粉。
  3. Survey of Colloidal Silica Sol Binder in Investment Casting
    熔模铸造用硅溶胶粘结剂综述
  4. When the colloidal casting processing technique was used to mold, the hardening time of silica sol shell without NH_4Cl aqueous solution was 38 hrs.
    采用胶态浇注成型法成型,不添加NH4Cl水溶液的硅溶胶型壳的硬化时间为38h;
  5. Study on Rheological Properties of Colloidal Zirconia Sol Coating Slurry for Titanium Alloy Precision Investment Casting
    钛合金熔模精铸锆溶胶涂料流变性能的研究
  6. It has shown that the colloidal particles of sol coppery activation solution were with nagative charge.
    结果表明胶体铜活化液的胶粒带负电荷。
  7. The percentage composition of colloidal sol gel and Some other properties of the SAP such as absorbency in ion less water, normal saline, artificial blood and artificial urine were also investigated.
    对树脂凝胶溶胶含量、土壤保水性、树脂对去离子水、生理盐水、人工血、人工尿的吸收能力及树脂的膨胀动力学和热分解动力学作了较为全面的研究。
  8. Nano-Ag ( diameter less than 20 nm) is successfully made from Ag colloidal sol and homogeneously dispersed into SP, and the dielectric characteristics of the composite are studied carefully.
    采用溶胶法制备的纳米Ag(直径小于20nm)均匀地分散到SP中后,对纳米复合材料的介电特性进行了研究。
  9. On Rheological and Technological Properties of Colloidal Silica Sol Slurry for Investment Casting
    熔模铸造用硅溶胶涂料的流变特性和工艺性能研究
  10. Fe3_O_4 magnetic fluid has been prepared by the way of colloidal sol. The effects of different coating temperature and coating acidity on absorption quantity of oleic acid on Fe_3O_4 particles and effects of varying dispersing temperature and carrier liquid on magnetism of Fe_3O_4 magnetic fluid were investigated.
    采用胶溶法(或称溶胶法)制备Fe3O4磁性流体.研究了不同包覆温度,不同包覆酸度对Fe3O4粒子吸附油酸量的影响;不同分散温度,不同载液对磁性能的影响。
  11. The percentage composition of colloidal sol-gel and molar percentage of carboxyl group (& COOH) of the resin were analyzed.
    分析了该树脂的溶胶、凝胶质量分数,羧酸根(&COOH)的摩尔分数。
  12. Gel breaking speed of the fracture fluid system decreases as the increasing of pH value of colloidal sol, and increases as the increasing of environment temperature;
    该压裂液体系的破胶速度随溶胶液pH值增加而减小,随环境温度的上升而逐渐增加;
  13. Effect of silicon colloidal sol on the hydrothermal stability of ultrastable Y zeolite
    添加硅溶胶对超稳Y沸石水热稳定性的影响
  14. The microstructure, morphology and corresponding physical properties of the microporous silica films are characterized and the chemical mechanisms of preparing colloidal silica sol and colloidal silica sol filming are discussed.
    讨论了纳米二氧化硅胶粒溶胶的形成和形成的二氧化硅溶胶先体的成膜化学机理,并对制备的多孔二氧化硅薄膜的微结构,形貌变化和相关的物理性能进行了表征。
  15. Investigation into Properties of Colloidal Silica Sol Primary Layer Coating
    精铸硅溶胶面层涂料性能的研究
  16. The colloidal sol catalytic system of nickel pyrite was synthesized and its ability for inhibiting the coke was examined.
    笔者还制成了稳定性较好的硫化态Ni催化剂的液溶胶催化体系,考察了其在加氢反应中的抑焦活性。
  17. Then the sol gel solution was infiltrated into the interstitial space of the colloidal crystals through capillary effect and ordered inverse opals were obtained after the solidification of the sol gel solution and the calcification of the polystyrene beads.
    将溶胶-凝胶前驱液在毛细效应作用下渗入胶体晶体间隙,待前驱液固化后,经煅烧去除苯乙烯微球,制备出了具有三维有序结构的多孔材料&倒置蛋白石。
  18. Use polymer A as main ingredient of coating type dripless agent, silica colloidal sol as film forming assistants, T-20 as surface active agent and ethyl alcohol as solvent to make up high efficacy driplesss agent paint.
    以聚合物A为涂布型无滴剂的主要组份,硅溶胶为成膜助剂,T-20为表面活性剂,乙醇为溶剂,配制高效能的无滴剂涂料。
  19. It was considered that the enclosed gold was present in the form of colloidal dispersed gold and the gold dispersed in the crystal minerals, such as pyrite, arsenopyrite, calcite, quartz in the form of colloidal sol.
    矿石中包裹金主要以胶体分散金形式存在,金以溶胶状分散于黄铁矿、毒砂、方解石、石英等结晶矿物中。
  20. In-situ colloidal forming of ceramics is the most promising method in making the near-net-shape and complicated ceramics, to which silica and alumina sol have been widely applied.
    陶瓷原位胶态成形方法是制备近净尺寸复杂陶瓷部件最具应用前景的方法,硅溶胶、铝溶胶也越来越多的应用于其中。
  21. Properties of Colloidal Sol of Microcrystalline Chitin
    微晶甲壳素溶胶性质的研究
  22. The ultra fine WO 3 powder was prepared by colloidal chemistry method, sol gel and polymerized complex method.
    通过胶溶法、溶胶凝胶法、聚合络合法合成了超细三氧化钨粉体。